Metro Moulded Parts

This tank hose is designed for vehicles with a fuel tank-to-filler pipe setup, measuring 2 inches in inside diameter and 6 inches in length. Made from high-grade neoprene and reinforced with wire, it...

This tank hose, designed for fuel tank to filler pipe connections, measures 2-1/8" I.D. and is 6" long, making it a perfect fit for most vehicles using this setup. Crafted from high-grade neoprene...

This tank hose, designed for fuel tank to filler pipe connections, measures 2-1/4" in inside diameter and is 6" long, making it a perfect fit for most vehicles using this setup. Crafted from...

This tank hose is designed for vehicles with a fuel tank-to-filler pipe setup, measuring 2-1/2" in inner diameter and 6" in length. Made from high-grade neoprene and reinforced with wire, it ensures...

These tapping screws are designed for use on various sheet metal parts, particularly for securing radiator support cores and other front-end components. This 25-piece set is crafted for high strength...

This tension spring, measuring 1-11/16" in diameter at the base, is designed for use in all door handles, vent handles, and window handles, making it a versatile and essential component for your...

Designed for 4-door trucks, this liftgate seal fits 2007-2014 Cadillac Escalade (ESV, EXT), Chevrolet Tahoe/Suburban (1500, 2500), and GMC Yukon (XL 1500, XL 2500) models, replacing OEM #22775503...

This Thermo Tube Through Dash Grommet, designed for classic cars like the 1946-1955 Bentley and Rolls-Royce models, measures 2-3/8" in outer diameter and is crafted to fit seamlessly through the...

This tie rod dust boot, designed for various vehicle types, measures 1/2" I.D., 1-5/16" O.D. (bottom), and stands 1" high, making it a precise fit for protecting your tie rod ends. Crafted from...

This timing hole plug is designed for 6-cylinder engines and measures 1-3/4" x 1-1/4", making it a perfect fit for your classic Chevrolet. Crafted by Metro Moulded Parts, it is built with...

This toolbox liner, measuring 12" x 60", is designed to keep your tools organized and protected. Made from advanced rubber compounds, it is resistant to sunlight, ozone, and chemicals, ensuring...

Designed for the classic Phaeton body style, these top center post pads measure 2-1/8" wide by 2-3/8" long and come as a pair for both the right and left sides. Specifically crafted for 1934-1936...

For the 1950 Lincoln Lincoln Car, this top hold-down pad measures 2 inches wide by 2-1/4 inches long, making it a perfect fit for securing your hardware while protecting your vehicle's finish...

Designed for the classic Sunbeam Alpine and Tiger cars from 1953 to 1975, this top hold-down pad measures 2-1/2" wide by 1-1/2" long, making it a perfect fit for your vehicle's hardware. Crafted by...

For the 1938 Cadillac Series 60, these top hold-down pads are essential for maintaining your car's elegance and functionality. Measuring 1-7/8" wide x 4-1/8" long and 1-1/4" wide x 3-1/4" long, this...

Designed for the 1940 Cadillac Series 60 Special, these top hold-down pads measure 1-7/8" wide by 4-1/8" long, offering a precise fit for your classic car. Crafted to prevent hardware from rattling...

Designed for the 1969-1972 Opel Opel Car, this top side door bumper measures 1" high, 1/2" wide, and 1" long, making it a perfect fit for your vehicle. Crafted by Metro Moulded Parts, this durable...

For 1953-1955 Buick Roadmaster, Special, Super, Century, and Skylark cars, this torque ball boot is a precise replacement for OEM #1170199. Measuring 3-3/8" at the top hole, 4" at the bottom hole,...

For 1948-1952 Buick cars, including the Roadmaster, Series 40, Series 50, and Series 70 models, this torque ball boot is designed specifically for vehicles with a Dyna Flow transmission, replacing...

For 2-door hardtops and convertibles, these Transmission Cross-Member Mount Insulators are designed to replace OEM #9774451. Built for durability and strength, they are crafted from advanced rubber...

This transmission plug is designed for the Jaguar XK-E series, with a 4-inch outer diameter to securely fit a 3-inch hole. Crafted with precision using over 50 tons of pressure, it ensures a perfect...

This transmission vacuum shift grommet is designed for classic cars, including 1939-1948 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac models, ensuring a precise fit for vehicles like the Buick...

Designed for the 1970 Plymouth Belvedere and 1970 Plymouth Road Runner, these trap door seals are crafted to fit perfectly, ensuring a snug and secure seal. Manufactured by Metro Moulded Parts, these...

For the 1955 Buick Century, Roadmaster, Special, and Super cars, this trim ring lens seal is designed with precision to fit perfectly. Measuring 7-1/2" in outer diameter and 6-7/8" in inner diameter,...

Designed for classic cars and trucks, these rubber trim ring lens seals are a perfect fit for vehicles like the 1937-1949 International D-2 and K-Series cars, 1940-1949 Buick and Cadillac models, and...

These trimming washers are designed for countersunk applications and measure 5/8" O.D. x 7/32" I.D., making them a perfect fit for a variety of uses. This 25-piece set from Metro Moulded Parts is...

These trimming washers, designed for universal use, measure 1/2" O.D. x 3/16" I.D. and come in a convenient 25-piece set. Crafted with a nickel-plated finish, they offer excellent durability and...

These trimming washers, designed for universal use, measure 7/16" O.D. x 3/16" I.D. and come in a convenient 25-piece set. Made by Metro Moulded Parts, they are nickel-plated for enhanced durability...

This trip meter reset knob is designed for classic cars, including the 1949-1967 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac models. Measuring 1/8" I.D., 7/16" O.D., and 1/2" tall, it is...

Designed for trucks, these heavy-duty mud flaps measure 12" x 17" and are crafted from high-quality black rubber to provide long-lasting durability and protection. Built to withstand tough...